运用橡胶空气弹簧的维护方式以达到使其延长使用寿命： The maintenance method of rubber air spring is used to extend its service life:
1、橡胶空气弹簧运用后，用清水冲洗干净，有粘附着混凝土的地方冲洗不掉时，应小心用木板或盾器刮除，以免橡胶空气弹簧破损。 1, after the use of rubber air spring, with clean water to rinse, there is a place of adhesion to the concrete can not be washed out, should be careful with the board or shield scraping, so as not to damage the rubber air spring. 2、橡胶空气弹簧如短时间之内不用，应有滑石粉将芯模外层涂摸，并安放在通风干燥处，防止将橡胶空气弹簧扎破。 2. If the rubber air spring is not used within a short time, it shall be coated with talcum powder and placed in a ventilated and dry place to prevent puncture of the rubber air spring. 3、橡胶空气弹簧不能与火源、油类及有机溶剂接触，不能与尖锐硬物放在一块儿，防止将橡胶空气弹簧扎破。 3, rubber air spring can not contact with fire, oil and organic solvents, can not be placed together with sharp hard objects, to prevent the rubber air spring puncture. 4、如发觉橡胶空气弹簧漏气，可在需修补处，用砂轮儿或木锉将其表面打毛，用燃料清洗后，涂上胶粘剂复盖胶片或胶布修补。 4, if you find that the rubber air spring leakage, you can be in need of repair, the grinding wheel or wood file to the surface of the wool, after cleaning with fuel, coated with adhesive coating film or adhesive patch repair.